High Pressure Pumps

With the new series of STREAMLINE SL-VI high pressure pumps for waterjet cutting, KMT WaterjetSystems optimizes their complete range of high pressure intensifi er pumps. Based on four frames indifferent sizes, the SL-VI series will grant the KMT customers an unprecedented choice of confi gurationpossibilities. And while being based on tried and tested technology, the SL-VI comes up with someconsiderable improvements compared to the predecessor model.Working pressure of up to 4,136 barThe pump units are available in three differentpower rates (22, 37 and 74 kW). Wherever required,the STREAMLINE SL-VI supplies high pressure waterof up to 4.136 bar. In those areas where such a highpressure is not needed, the STREAMLINE SL-VI cancut material at a lower pressure.Improved motor performanceThe motor of the STREAMLINE SL-VI pumps allowsfor multi input voltages and has been upgraded toIE3 according to the norm EC 640/2009. This leadsto an optimized motor effi ciency: Compared toprevious models, the pump can create a higher fl owrate of the high pressure water at the same motorrating, thus increasing the maximum possible orifi cesize and with it the cutting system's productivity.Patented intensifi er technologyThe new patented Curve-On-Curve Design of ourintensifi ers allows for a longer lifetime of thecylinder body / seal head connection. The optimizedgeometry of the metal-on-metal seals facilitates theinstallation and endures more maintenance cyclesthan conventional technologies.

Notes:

The Product price mentioned is a notional value only and is not the actual price.

STREAMLINE PRO-III - The high pressure pump featuring the industry’s most powerful combination of horsepower and pressure

With the introduction of the 6,200 bar PRO technology, KMT Waterjet Systems brought waterjet cutting to a new level. As a result of the continuous efforts to further advance this technology, KMT developed the new optimized SUPRAlife Seal for the intensifier of the STREAMLINE PRO-III high pressure pump for waterjet cutting offering the industry’s most powerful combination of horsepower and pressure with significant improvements in uptime.

Unsurpassed Productivity

The advantages of waterjet cutting at the high operating pressure of 6,200 bar are particularly relevant for efficiency where operators need to cut thick and/or very hard materials. The high operating pressure improves conformality as well as the quality of the cut edge compared to traditional 4,000 bar applications.

• Depending on the material and its thickness, cutting with 6,200 bar allows operators to increase the cutting speed by up to 50%. In some applications, the increase is even considerably higher.
• Higher operating pressures improve conformality as well as the quality of the cut edge. In many cases, there is no need for reworking cut edges.
• Waterjet cutting with 6,200 bar significantly reduces the consumption of abrasive.

Improved uptime of the high pressure pump thanks to optimized SUPRAlife Seal design - 500 hours warranty

To achieve longer uptimes and a more efficient high pressure pump, KMT revised the design of the high pressure seal construction: Instead of installing the seal package into the cylinder bore, it is integrated into a cartridge housing which seals against a chamfer at the end of the cylinder. This prevents damage from the cylinder bore. The new design significantly increases the seal life compared to the previous technology.

To benefit from a maximum seal life, a consistent pre-load needs to be applied to the assembly. Therefore, a hydraulic pre-tensioner is included in the dedicated tool kit. This facilitates the maintenance and always guarantees the exact tightening torque thus ensuring maximum seal life.

Patented intensifier technology

The new patented Design of our PRO-III intensifier waterjet pump allows for a longer lifetime of the cylinder body  /  seal head connection. The optimized geometry of the metal-on-metal seals facilitates the installation and endures more maintenance cycles than conventional technologies.

Benefits of KMT’s PRO-III Intensifier:

• Revised high pressure seal design using the optimized SUPRAlife Seal for a longer lifetime featuring 500 hours warranty
• Patented Intensifier Design
• Sophisticated heat treat of the seal head body
• Titanium discharge check valve
• Stainless steel liners
• Optimized hydraulic piston design for a better sense of the proximity switch
• Super polished plunger

 

KMT Service Guaranteed Worldwide

KMT Waterjet operates on five continents and maintains a network of sales and service agencies all over the world. You can thus be rest assured that spare parts for your equipment will be readily available. Thanks to the global network of KMT Waterjet, assistance is never far away.

TRILINE - The direct-drive pump by KMT
With the direct-drive high pressure pump TRILINE TL-I 30, KMT Waterjet Systems broadens their product range by adding an alternative pump technology to their portfolio. The new pump has an excellent cost of ownership value and can be used as a stand-alone unit for everyday cutting needs.

Efficiency for everyday cutting
The TRILINE TL-I 30 is best used as a continuous duty water pressure generator. It achieves a very high degree of efficiency when the cutting time reaches at least 80% of the motor running time. Its small footprint and high efficiency at continuous operation is ideal for little job shops doing conventional shapecutting. However, it may also prove valuable in a more demanding environment with high running times.

Modern reliable design for continuous operation
The heart of the TL-I 30 direct-drive Pump is the crank case, which has been designed to allow for top performance and easy maintenance. It features a machined stainless steel subplate with integral cooling passages so that the rods are not exposed to environmental influences. Engineered vibration and noise dampening ribbing in the case ensure quiet and smooth operation. For further ease of use, a sight glass enables the operator to instantly check the oil level without using a dip stick and to easily inspect oil dirtiness.

Patented pressure valve for flexibility
The patented Pressure Control Valve allows for quick changes to the water pressure or flow which is directed from the pump to the cutting heads. The valve controls the water pressure/flow by pressurized air and reduces maintenance as well as enables cutting at any pressure. It features fast response times and is highly reliably and very simple to maintain.

Features of the TRILINE TL-I 30 direct-drive pump

• The TRILINE TL-I 30 pump combines patented seal technology used in 6,200-bar-machines with direct-drive efficiency
• Patented valve for running multiple independent cutting heads
• Softstarter reduces the startup current needed for the motor
• Small footprint
• Improved efficiency
• Low sound level
• Efficient IE3 compliant motor
• CE-mark
• No necessity for separate cooling water
• Adjustable high and low pressure
• Excellent pressure signal thanks to the phased movement of three pistons
• Power transmission from motor to topworks via an easily maintainable belt and pulley drive system
• The direct-drive pump can run larger orifices at the same motor rating than an intensifier pump

• Notes:

  The Product price mentioned is a notional value only and is not the actual price. kindly note all our products are imported and the prices shall be  in EUROS.  

For application which do not require a maximum pressure of 4,136 bar, KMT WATERJET SYSTEMS offers the STREAMLINE SL-VI STD high pressure pump as a lower priced alternative still featuring KMT's advanced pump technology. The STD models can be operated both independently as a standalone unit or communicating with the central control system of the entire cutting machine.
Applicable for pure water & abrasive cutting The STREAMLINE SL-VI STD is designed for flexible production in pure water as well as in abrasive applications. It is dedicated to those kinds of cutting jobs which require cutting pressure of up to 3,800 bar. The high reliability and lifetime performance equal those of our more sophisticated PLUS models. Durable components The plunger of every SL-VI pump model consists of a ceramic material. Compared to a metal plunger, the harder and smoother surface resists better against wear, eliminates scoring and increases seal lifetimes. Softstarter saves electricity costs The included softstarter additionally helps you todecrease your operating cost by reducing peaks in the consumption of electricity. Your local current supply usually does not have to get modified to install the STREAMLINE SL-VI unit.
Individual configuration As both pump models SL-VI PLUS and SL-VI STD are based on the same technology and the sameframe, operators of an STD pump can benefi t from the advanced hi-tech design of the PLUS model. By choosing different confi guration possibilities, the pump can be customized to fi t the operator's demands.

 

Notes:

The Product price mentioned is a notional value only and is not the actual price. kindly note all our products are imported and the prices shall be  in EUROS. 

With its PRO high-pressure range, KMT Waterjet Systems sets new standards in the field of waterjet cutting. PRO stands for waterjet cutting technology with operating pressures of up to 6,200 bar,and the range of products includes all necessary components and accessories - from high-pressure generation units to orifices that guide the cutting jet with great precision onto the material.

 STREAMLINE PRO ultra high-pressure pumps

 ACTIVE AUTOLINE PRO abrasive cutting head  ACTIVE IDE PRO abrasive cutting head

 AQUALINE PRO pure water cutting head  AMS PRO abrasive management system

 PSC PRO valves, pipes and fittings 
Taking into account the increased exposure to high pressure, the PRO products were designed to ensureeconomical operation with enhanced service life.The original PRO series by KMT Waterjet thus offers you optimized high-pressure equipment meetingthe highest requirements as regards reliability andcutting quality in heavy-duty continuous operation.

Advantages of Waterjet Cutting at 6,200 bar

Compared to conventional waterjet cutting at 4,100 bar, the increased maximum pressure range features the following benefits:

 Higher cutting speeds  Improved cutting edge quality

 Lower abrasive consumption  Higher productivity

 Optimized machine utilization  Improved conformality

 Reduced delamination 
 STREAMLINE PRO

The high pressure pumps of the STREAMLINE PRO series have signifi cantly enhanced the productivity and efficiency of the waterjet cutting technology. The innovative high pressure pumps have been designed for both pure water and abrasive waterjet cutting at operating pressures of up to 6,200 bar. The STREAMLINE PRO is available in two models with 45 kW or 93 kW. At a pressure of 6,200 bar, the two machine versions offer volumetric flows of 2.8 l/min and 6.0 l/min respectively. This enables the operator to cut with either single or multiple heads.

 With the introduction of the 6,200 bar PRO technology, KMT Waterjet Systems brought waterjet cutting to a new level. As a result of the continuous efforts to further advance this technology, KMT developed the new optimized SUPRAlife Seal for the intensifi er of the STREAMLINE PRO-III offering the industry’s most powerful combination of horsepower and pressure with significant improvements in uptime.

 Benefi ts of KMT’s PRO-III Intensifier

 Revised high pressure seal design using the optimized SUPRAlife Seal for a longer lifetime

 Patented Intensifi er Design  Sophisticated heat treat of the seal head body

 Titanium discharge check valve  Stainless steel liners

 Optimized hydraulic piston design for a better sense of the pro ximity switch

 Super polished plunger

 

Notes:

The Product price mentioned is a notional value only and is not the actual price.

Engineered for Higher Performance, Reliability & Durability. New Compact Topworks Intensifier Design. Advanced Digital Pump Management. Compact Design Platform Saves Floorspace. New Price Points at the Lowest Cost. Magnetic, Quick Removal Doors for Easy Maintenance. Patent-Pending High Performance Seal Technology

Notes:

The Product price mentioned is a notional value only and is not the actual price. kindly note all our products are imported and the prices shall be  in EUROS.

For application which do not require a maximum pressure of 4,136 bar, KMT WATERJET SYSTEMS offers the STREAMLINE SL-VI STD high pressure pump as a lower priced alternative still featuring KMT's advanced pump technology. The STD models can be operated both independently as a standalone unit or communicating with the central control system of the entire cutting machine.
Applicable for pure water & abrasive cutting The STREAMLINE SL-VI STD is designed for
flexible production in pure water as well as in abrasive applications. It is dedicated to those kinds of cutting jobs which require cutting pressure of up to 3,800 bar. The high reliability and lifetime performance equal those of our more sophisticated PLUS models.Durable components The plunger of every SL-VI pump model consists of a ceramic material. Compared to a metal plunger, the harder and smoother surface resists better against wear, eliminates scoring and increases seal lifetimes. Softstarter saves electricity costs The included softstarter additionally helps you to decrease your operating cost by reducing peaks in the consumption of electricity. Your local current supply usually does not have to get modifi ed to install the STREAMLINE SL-VI unit.

 

Notes:

The Product price mentioned is a notional value only and is not the actual price. kindly note all our products are imported and the prices shall be  in EUROS. 

The right solution for every application

With the introduction of the new modular STREAMLINE SL-VI series of high pressure pumps for waterjet cutting, KMT Waterjet Systems offers the ideal technology for every requirement – from occasional cutting needs to multi-shift operation. Depending on the application the pump is needed for, customers can choose from different pressure ranges, motorizations and configuration levels.

Working pressure of up to 4,136 bar

 The pump units are available in three different power rates (22, 37 and 74 kW). Wherever required, the STREAMLINE SL-VI supplies high pressure water of up to 4.136 bar. In those areas where such a high pressure is not needed, the STREAMLINE SL-VI can cut material at a lower pressure.

Improved motor performance

 The motor of the STREAMLINE SL-VI pumps allows for multi input voltages and has been upgraded to IE3 according to the norm EC???640/2009. This leads to an optimized motor efficiency: Compared to previous models, the pump can create a higher flow rate of the high pressure water at the same motor rating, thus increasing the maximum possible orifice size and with it the cutting system's productivity.

Patented intensifier technology

The new patented Curve-On-Curve Design of our intensifiers allows for a longer lifetime of the cylinder body???/???seal head connection. The optimized geometry of the metal-on-metal seals facilitates the installation and endures more maintenance cycles than conventional technologies.

Top cover guard interlock design

The top cover is made of transparent material. Therefore, a visual inspection of the intensifier assembly is possible without the necessity to open the cover. Moreover, the top cover guard interlock design meets the EN???ISO???13849-1 safety performance standard thus providing increased operational safety when working with the pump

Long-term competitiveness

 We are continually adding new technology to our pumps and making it available as retrofit kits for older pumps. Buy a KMT WATERJET pump today and be assured that you will have access to the most efficient and latest technology long into the future.

 

Notes:

The Product price mentioned is a notional value only and is not the actual price. kindly note all our products are imported and the prices shall be  in EUROS. 

The JETLINE™ high pressure pump combines all the advantages of KMT Waterjet Systems for waterjet cutting applications. For decades, KMT high-pressure technology has set the standard in this field, offering unrivalled efficiency, high continuous load capability and availability. Developed specifically to meet the requirements of the Asian market, the JETLINE™ high pressure pump meets all expectations regarding cost-efficient waterjet cutting.

Pure water and abrasive cutting
Each cutting method has its own advantages and disadvantages. From the separation of relatively soft materials by means of pure water jets to abrasive cutting of extremely hard or brittle materials, the JETLINE™ high pressure pump offers all you need to efficiently process virtually any substance.  

Trusted SSEC pressure intensifier concept

 Several thousand intensifiers of the Soft Seal End Cap (SSEC) type are currently in use all over the world, many of them in multiple shift operations. The highly reliable SSEC intensifier unit is one of the key features of the JETLINE™ high pressure pump and is often referred to as "the heart of the pump".

Built-in safety thanks to intelligent control system

To ensure highest safety and reliability, the JETLINE™ is equipped with a Siemens PLC system. Through its four-line display, it provides the machine operator with valuable information regarding the operating status of the pump. Information that might be relevant for proper servicing is thus easily available, and the display acts as an indispensible tool for troubleshooting

Suitable for stand-alone operation or integration into overall system

Depending on the customer's requirements, the pump can be run as a stand-alone unit or integrated into the control system of the overall plant. The messages of the four-line display can be transferred to the control desk display of the plant control system.

Integrated heat exchanger
The standard model of the high pressure pump comes with an integrated heat exchanger for easy connection to the cooling water supply system.

Tried and tested concept helps reduce operating cost

As the intensifier contains only a small number of wear parts, operating costs are kept low in comparison with conventional pumps. Also contributing to the outstanding economy of the pump are the long service life of the components subject to wear. Costly downtimes are thus virtually eliminated, which is of particular importance for multiple shift operations.

Energy-efficient motor start
To prevent voltage peaks that affect the energy costs, each JETLINE™ pump is equipped with a Wye-Delta starter unit. Your power system is thus not subjected to unnecessarily high loads.

KMT service guaranteed worldwide
KMT WATERJET operates on five continents and maintains a network of sales and service agencies all over the world. You can thus be rest assured that spare parts for your equipment will be readily available. Thanks to the global network of KMT WATERJET, assistance is never far away.

 

 

Notes:

The Product price mentioned is a notional value only and is not the actual price. kindly note all our products are imported and the prices shall be  in EUROS.